We started cutting our aluminum triangle faces for Smart Surfaces out of our large (4'x8') sheet of 3/16th aluminum yesterday. I say started because the entire cut is going to take 3 hours and use 180 lbs of the abrasive material and we ran out of abrasive material. Sooo, we get to finish it up on Monday.
Either way, the water jet cutter is one of the most useful machines in the Digital Fab Lab in my opinion. The quality of the cuts are nearly finished quality and it does a beautiful job of intricate cuts. Also, the Fab Lab guys are great, they know what they are doing and are fun to work with. Highly recommended.
The aluminum sheet in the machine, pre cutting.
Cutting a piece out. It's quite a machine to watch, lots of high pressure water, bubbles, and noise!
A cut piece. Just a little sanding on the edges and it's ready to go into a wall module.
At this time we are also laser cutting out the acrylic sections of the module, we have 3 4'x8' sheets of acrylic, so lots and lots of laser cutting ahead of us!
Thanks for reading!
No comments:
Post a Comment